IFAI Expo 2019

Dr. Martin W. King
Professor of Biotextiles & Textile Technology
NCSU, College of Textiles


Martin King is regarded as an international specialist in the area of biotextiles, implantable devices, biomaterials and medical textiles. He joined the Department of Textiles and Apparel, Technology and Management in September 2000 following over 30 years experience working in industry, education and the government sector in Canada and Europe. As one of the first graduates in Polymer Technology from Manchester University, U.K., Martin King was hired by Canadian Industries Limited (I.C.I. Fibres Division), and later by Celanese Canada Limited, Montreal, Canada, to work as a product development engineer on nylon and polyester fibers and yarns at its Millhaven plant in Kingston, Ontario, Canada . During this time he worked on the start-up of the first continuous polymerisation plant for the spinning of short staple polyester fiber for blending with cotton, on improvements in texturising nylon and polyester multifilament yarns, as well as developing polyester fibre/rubber adhesive systems that led to the manufacture of the first commercial polyester tire cord. Martin King then returned to the U.K. to work with L.N. Phillips and W. Watt on the development of carbon fibers at the Royal Aircraft Establishment (now the Defence Science and Technology Laboratory), Farnborough, Hants. He was instrumental in identifying alternative precursor polymer systems and wet spinning and carbonising biconstituent acrylic/novoloid fibers for use in carbon fiber reinforced composites.

Sessions :